Originally Posted by 3665RE
There are 3 tricks to not pushing your seals out of the back of the EZ Lube hub. First jack the wheel off the ground and rotate it during the grease insertion process. Second donít grab your grease gun with both hands and rapidly pump it. Third donít use an air driven grease gun like you see at the oil & lube stores.
Follow these procedures and you wonít push your seals out of the back of the hub.
ASE: Master Auto, Master Truck, Master Machinist & 3 Bus certifications.
That is Dexters recommended procedure. Then again, who reads instructions_.
2000 Winnebago Ultimate Freedom USQ40JD
, ISC 8.3 Cummins 350, Spartan MM Chassis. USA 1SG, retired;PPA,Good Sam Life member."We the people are the rightful masters of both the Congress and the Courts - not to overthrow the Constitution but to overthrow men who pervert theConstitution. "Abraham Lincoln"