We had a companion slider hitch installed 2 months ago when we bought a 5ver. Now it's time to start cutting firewood here in the mountains of SW Colorado and would like to remove the slider. I loosened the draw down bolt, then pulled the latch pin handle out but can't get it to turn and unlock the latch pin. Am I missing something or is it possible the slide is in a bind? Any help would be appreciated. FWIW I built a stand on casters(each rated at 175lbs) to pull the slider out on to so I can move it around the garage.
Oh yes it's a model 3400 slider.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
On my non slider companion, I have to loosen u bolts as well. But im not sure the newer ones still work that way. I'd think if you can pull the turnover system pin out, the hitch should pop loose. Maybe a second person helping if you haven't tried that yet ?
Mine is the new model and doesn't have u-bolts. The directions state to pull out and turn clockwise to release the latch. I just can't get mine to turn to release the latch.