|
03-03-2013, 09:59 AM
|
#1
|
Junior Member
Join Date: Jan 2012
Posts: 1
|
cracked front cap 2004 cougar 5th wheel
I HAVE A 2004 5TH WHEEL TRAILER THAT HAS A CRACK ABOUT 18 INCHES LONG FROM THE TOP DOWN, WAS WONDERING IF ANYONE ELSE HAS HAD THIIS HAPPEN AND HOW TO FIX. DONT KNOW IF THE FRONT CAP IS FIBERGLASS OR PLASTIC. IF IT IS FIBERGLAS I WOULD TAKE TO A BOAT REPAIR SHOP BUT THE PLASTIC I DONT HAVE A CLUE AS HOW TO FIX IT. CAN ANYONE HELP WITH THIS.
THANKShttp://www.irv2.com/forums/images/smilies/sad.gif
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
03-03-2013, 12:21 PM
|
#2
|
Moderator Emeritus
Ford Super Duty Owner
Join Date: Aug 2000
Location: Bryan, TX when not traveling.
Posts: 22,948
|
I do not read post typed in ALL CAPS.
I see it your first post, welcome to iRV2
Ken
__________________
Amateur Radio Operator (KE5DFR)|No Longer Full-Time! - 2023 Cougar 22MLS toted by 2022 F150, 3.5L EcoBoost Tow Max FX4 Lariat Travel with one Standard Schnauzer and one small Timneh African Gray Parrot, retired mechanical engineer
|
|
|
03-03-2013, 12:27 PM
|
#3
|
Senior Member
Newmar Owners Club
Join Date: Oct 2009
Posts: 10,310
|
I would think what ever the material is if you have a favorite local body shop, he would be able to advise you and more than likly fix it for you and repaint it.
__________________
2012 Essex 4544 2011 Jeep JK, M&G Braking, 2014 MTI 27' Hog Hauler, Wireless brake control, 2006 Ultra & 1989 Springer, 2003 Harley-Davidson
FLHR Road King Anniversary
|
|
|
03-03-2013, 10:55 PM
|
#4
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,903
|
You are right about fiberglass repairs, boat or auto-body shop. I doubt it is plastic, but if it is, here again an auto-body shop can "weld" the crack full, making it just as strong as original. I would suggest finding out why it cracked, so you can take action to prevent a future occurrence. Keep water out of the crack to prevent water damage. Even a piece of awning repair tape will seal the crack against water leaks until permanent repairs can be accomplished.
[U]Do not use a sealer containing silicone[U] to seal the crack. Silicone doesn't hold well and the residue it leaves is hard to remove, little else will stick to the residue.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
03-03-2013, 11:53 PM
|
#5
|
Senior Member
Join Date: Nov 2010
Location: Slocan Park
Posts: 242
|
Quote:
Originally Posted by TXiceman
I do not read post typed in ALL CAPS.
I see it your first post, welcome to iRV2
Ken
|
If you don't read them, then don't respond! As a moderator you should have a little more cooth.
Now back to the OP. We had a 2009 Cougar, the front cap was fiberglas. You could have picked up a rock, or something while traveling at some point for the crack to originate.
__________________
2017 Ram 3500 Dually & 2012 Arctic Fox 29-5K Silver Fox Edition 5th wheel
Paul & Sheryl
|
|
|
03-04-2013, 03:53 AM
|
#6
|
Senior Member
Join Date: Nov 2009
Posts: 2,043
|
Most I've run across are an injection molded polymer like what golf cart bodies and even many auto/truck bumper covers are made from. I believe ClubCar refers to it as ArmorFlex. If it is, then the only product that will work is made by 3M - it's a 2-part type of epoxy specifically for bumper cover repairs.
__________________
94-Newmar Kountry Star 40-KSDP
Spartan/Cummins 8.3C-300HP/Allison 3060 WTEC-II/25yr RV Tech RVIA Certified/Onan-Cummins Certified
|
|
|
03-05-2013, 04:43 PM
|
#7
|
Senior Member
KZ RV Club
Join Date: Jan 2013
Location: East Alabama
Posts: 125
|
Fiberglass is easy, that's a no brainer there.
Plastic, polypropelyne, and PVC can all be welded. We have a plastic "welder" in the shop that we use on stuff like that. It's really nothing more than a highly directed heat gun and you use the appropriate filler rod to repair the crack. It's done exactly like TIG welding. You gotta be careful when doing it as it's real easy to burn the surrounding material. It works well on thicker plastics, but thinner stuff can be tempmental.....plastics warp very easy.
__________________
2013 KZ 336RE
2012 Ram 3500 DRW/CC/4WD
3 fur kids and a wife that put up with 20 years in the Army.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|