Hi, new here, thanks for the bulletin board.
BTW, my username is supposed to be Caliphony_puller, apparently there's insufficient space for that length of title...but the one I ended up with works in it's own way
Here's why I signed up, need help in the following area:
Our 5'r needs an interior wall and overhead bunk removed and the remaining interior affected needs to be finished so, as my Dad says, "It doesn't look like I did it"
.
I've figured out the demo and can facilitate that portion of the project, but the challenge is finding that one person/shop/company that will commit to the re-finishing.
The ceiling will have screw holes where the demo'ed attachment was taken loose, as well as some in the side paneling. Some paneling will need to be ripped to fit endwalls and trim pieces applied. Some matching batten, corner trim and joint tape will need to be resourced. (Subject is 2012 Keystone, factory no joy on comm. regarding replacement trim pieces
, dealer says send pics and we'll go from there
, likely matching trim and batten available). One light switch will need to be re-positioned (I can do) and there is no affected plumbing/wiring
.
Anyone know of that "handy, skilled and thorough" person in the USA who can do?
Thanks in advance, tj
Linear Mode
