I have no 110 to my converter and I have traced the 110 to my onboard breaker box which has 110 but nothing from there to the converter. Has anyone had a problem like this or do you have any suggestions. All was working before I pulled it to the inspection station for the annual inspection and now nothing. Thank you for any help or suggestions I am at a loss and have been working on cars and trucks for 70 years as well as some ham radios.
Tom
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Hey Tom, If you have power coming out of the breaker but not at the Converter there must be a break in the wire. Also I know that most Converters have fuses so check those. Good luck.