Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > 5th Wheel Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 02-18-2013, 09:21 PM   #1
Senior Member
 
Join Date: Jan 2001
Location: West Creek, N.J. U.S.A
Posts: 102
wiring problem

I have a 02 everest.When driving the panle in my f350 shows trailer fault with a beeper going off.This happens dring or standing.With tow haul on or off.The brake lights work but the slide break control does not. I have checked tha accessible connections and they seem to be ok.

Any ideas will be appreciated.
__________________

__________________
2006 F350 diesel 2002 Everest 29ft.RK

Kevin & Dot
oceancamper is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 02-18-2013, 09:53 PM   #2
Senior Member
 
Ray,IN's Avatar
 
Join Date: Aug 2001
Location: North America somewhere
Posts: 13,709
You might receive more attention if you have the moderators move this question to the tow vehicles and towing board. I assume your Ford trailer brake control is the factory-installed unit correct? Ford should have a trouble-shooting guide for their brake control. That is all the advice I can offer.
__________________

__________________
2000 Winnebago Ultimate Freedom USQ40JD, ISC 8.3 Cummins 350, Spartan MM Chassis. USA 1SG, retired;PPA,Good Sam Life member,FMCA."We the people are the rightful masters of both the Congress and the Courts - not to overthrow the Constitution but to overthrow men who pervert the Constitution. "Abraham Lincoln"
Ray,IN is offline   Reply With Quote
Old 02-18-2013, 10:22 PM   #3
Senior Member
 
steelpony555's Avatar
 
Texas Boomers Club
Join Date: Apr 2009
Location: Central Texas
Posts: 157
Sounds like it is telling you that you have a short in your wiring. That could be anything from bad magnets to a worn wire. Just had this happen on my rig but I have a P3 and it tells me "overload" and it acts like you are explaining. I would read your manuel for the truck and it should tell you what your brake controller is trying to tell you.
__________________
2010 Dodge Ram Laramie Big Bertha
2015 Cedar Creek Silverback 29IK
Dave and Jeannie with Chico, Miss Bella & Kassie
steelpony555 is offline   Reply With Quote
Reply

Tags
wiring



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:58 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.