|
04-22-2005, 03:00 PM
|
#1
|
Junior Member
Join Date: Apr 2001
Location: NAPLES, FLORIDA
Posts: 7
|
HI all,
Are 5th wheel hitches attached to the bed or are they bolted through the frame?
Thanks
Loren
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-22-2005, 03:00 PM
|
#2
|
Junior Member
Join Date: Apr 2001
Location: NAPLES, FLORIDA
Posts: 7
|
HI all,
Are 5th wheel hitches attached to the bed or are they bolted through the frame?
Thanks
Loren
|
|
|
04-22-2005, 03:09 PM
|
#3
|
Senior Member
Join Date: May 2001
Location: NV
Posts: 2,065
|
Through the bed, welded TO the frame.
My Husky 16K slider hitch (i have a SB) has 4 hefty L brackets welded to the frame and then bolts holding the rails that are on top of the bed to the L brackets below.
So if I was ever to take this hitch out of my truck permanently, it would only leave 4 inconspicuous 5"x5" L brackets welded to the frame right around the rear axle area.
__________________
F350 PSD 4x4 SRW, BanksBrake, FOX res shocks, MagHytec, DP tuner, JohnWood tranny;
ChrisCraft Launch VP8.1 ;
3 hound dogs
|
|
|
04-22-2005, 04:21 PM
|
#4
|
Senior Member
Texas Boomers Club
Join Date: Jul 2000
Location: Cypress, Texas USA
Posts: 8,854
|
The 5th wheel hitch MUST be securely attached to the frame. My B&W hitch is bolted to the frame rails using existing holes.
Rusty
|
|
|
04-22-2005, 04:37 PM
|
#5
|
Senior Member
Join Date: Jul 2001
Location: Tucson AZ
Posts: 393
|
|
|
|
04-22-2005, 04:48 PM
|
#6
|
Senior Member
Newmar Owners Club Nor'easters Club Ford Super Duty Owner
Join Date: Jan 2002
Location: Chittenango, (Syr) NY
Posts: 981
|
My Reese is the same as Rusty's, brackets bolted to the frame and hitch bolted through the bed to the brackets. Transferred it from the 95 f250 to the 01 f350 in less than an hour.
Mike
go here
http://www.reese-hitches.com/15ak_5th_wheel.htm
click on install instructions under the picture for a PDF file of same.
__________________
'4? Wife Lynda
'08 F450 PSD CREW
'08 Newmar Cypress 36LKSH
|
|
|
04-22-2005, 06:46 PM
|
#7
|
Junior Member
Join Date: Apr 2005
Location: Lenexa, Ks
Posts: 6
|
I don't know of any current model hitch that requires welding to the truck frame anylonger. Most are bolted to the frame, but never to the bed. Mike
__________________
Home is where the beach is
|
|
|
04-22-2005, 07:19 PM
|
#8
|
Moderator Emeritus
Ford Super Duty Owner
Join Date: Aug 2000
Location: Bryan, TX when not traveling.
Posts: 22,948
|
I think all of the chassis manufacturers specifically state....Thou shall not weld up thy truck frame....
Ken
__________________
Amateur Radio Operator (KE5DFR)|No Longer Full-Time! - 2023 Cougar 22MLS toted by 2022 F150, 3.5L EcoBoost Tow Max FX4 Lariat Travel with one Standard Schnauzer and one small Timneh African Gray Parrot, retired mechanical engineer
|
|
|
04-23-2005, 03:08 AM
|
#9
|
Junior Member
Join Date: Apr 2001
Location: NAPLES, FLORIDA
Posts: 7
|
Thanks guys. Looks like brackets and welding is the way to go.
Loren
|
|
|
04-23-2005, 04:35 AM
|
#10
|
Moderator Emeritus
Ford Super Duty Owner
Join Date: Aug 2000
Location: Bryan, TX when not traveling.
Posts: 22,948
|
Racer22, you need to check with the maunfacturer of your truck before you weld on the frame. It may well void the warranty. Most of todays truck frames are made of a high strength steel and welding will ruin the properties of the base material. All of the hitches I have seen are bolt on designs.
Ken
__________________
Amateur Radio Operator (KE5DFR)|No Longer Full-Time! - 2023 Cougar 22MLS toted by 2022 F150, 3.5L EcoBoost Tow Max FX4 Lariat Travel with one Standard Schnauzer and one small Timneh African Gray Parrot, retired mechanical engineer
|
|
|
04-23-2005, 06:24 AM
|
#11
|
Senior Member
Texas Boomers Club Fleetwood Owners Club Freightliner Owners Club
Join Date: Jul 2001
Location: Big Spring, Texas
Posts: 776
|
Ken is right check with your truck dealer to see what can and can't be done when it comes to welding on the frame. When I bought my 2003 Dodge Dually it was expressly forbidden to weld on the frame. If you do and something happens to the frame you will not have any warranty.
__________________
Jerry and Janell
Navy by record, Marine by choice. 2020 Thor Chateau 31 W towing a 2019 Jeep Grand Cherokee Limited
|
|
|
04-24-2005, 08:01 PM
|
#12
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,951
|
Use the special bolts supplied with the bracket kit. The bolts are similar to wheel studs, having splines that press into the frame, eliminating all possibility of movement or frame weakening.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
06-23-2005, 10:04 AM
|
#13
|
Member
Join Date: Oct 2000
Location: Louisville Kentucky USA
Posts: 48
|
All go through the bed, bolt to or around the frame but no welding on the frame . New box frame adapter used to bolt around the frame not through it .Bolt only through the frame in the side not more than I"closer to the top or flange , brackets two bolts each . care to not cut or drill in to the fuel tank or lines ,or wires. assemble hitch and rails position in bed, mark for frame holes check with instructions measure twice drill once. center of hitch pin should be one to three inches forward of the rear axle ,to one inch to the rear of the rear axle . Skipper entry level over fifty years.
__________________
99 DCTD 3500 PAC-Brake Line x 5spd guages SW- EGT,Boost,FP
95 American Star 5th w/ 1 slide.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|