Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > Trailer Towing and Tow Vehicles Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 06-21-2014, 07:17 PM   #1
Senior Member
L.C.Gray's Avatar
Join Date: Aug 2012
Location: Deep in the Heart of Texas
Posts: 389
Adjust the WDH?

I traded tow vehicles today and at a glance I can tell there's 2-3" difference in height on the receiver box between the two trucks. I figure I'll just hook up with my existing WDH gear first and see what I have. Problem is I'm not sure what I should be looking for. I pulled my first trailer as it was set up by the previous owner and when I traded trucks with it, the receiver boxes on both trucks were the same height. When I took delivery of the current trailer new from the dealer I brought all my WDH gear with me and let them do all the setup.

I have no option to adjust the hitch downward as the PO chopped off the lower part of the T bar, but I can still go up 1 notch or flip it over and go up 2. That's good because the new TV is lower than the old one. What what will really drive the decision to make the height adjustment beyond an obvious way out of level trailer stance?

L.C.Gray is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-21-2014, 09:09 PM   #2
Senior Member
Join Date: Sep 2013
Posts: 121
You can leave everything as is or go one notch up. The objective is to have the trailer sitting slightly nose down or level, it's better for aerodynamics and stability
Gene//////'16 Passport 2670 BH
'11 Mercedes ML 350 gas, Reinforced OEM hitch receiver,1000 lb Eaz-Lift with custom welded head, 2 sway control bars, P2, tst 507 trailer TPMS
RGene7001 is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot adjust outside rear view mirrors lbaldwin Monaco Owner's Forum 2 05-13-2014 10:13 AM
Adjust Awning ACE 29.2 Ddono Thor Industries Owner's Forum 1 05-12-2014 07:53 PM
Air Leveling on 2000 Country Coach does not auto adjust after engine cut off Affinityfan RV Systems & Appliances 2 03-29-2014 07:54 PM
How to adjust rear airbags? CountryFit Country Coach Owners Forum 18 08-05-2013 01:03 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 10:42 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.