Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > Trailer Towing and Tow Vehicles Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 11-05-2012, 07:03 PM   #1
Senior Member
Bobb.25's Avatar
Rexhall Owners Group
Join Date: May 2011
Location: South Central Ohio
Posts: 416
Demco KarKaddySS Parts

My KarKaddy has done a wonderful job on a 7000 mile western trip, including a section of Highway 1 in north California to get us to an oceanside campground.
However half way across Nevada on I-80 we had a catastrophic failure of one of the tires. I have replaced both tires, but the one which exploded also destroyed all of one of the fender assemblies. I would like to find a source for the complete fender assembly, as well as a few other parts I need. I live in south central Ohio, if that makes a difference,... Thanks

Bobb.25 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 11-05-2012, 09:01 PM   #2
Senior Member
kalynzoo's Avatar
Join Date: Mar 2007
Location: Northridge, Ca
Posts: 751
When a similar blowout occured on my Demco KarKaddy I called Demco and they promptly sent all the parts I needed for a complete repair including a can of matching spray paint. It was at my expense, which I expected, but it was prompt, they were most helpful and I appreciated the concern they expressed.

kalynzoo is offline   Reply With Quote
Old 11-05-2012, 09:07 PM   #3
Senior Member
Mr_D's Avatar
Winnebago Owners Club
Solo Rvers Club
iRV2 No Limits Club
Join Date: May 2011
Location: Vancouver, WA
Posts: 31,246
Have had our KK-460 since 2007 so it's well out of warranty. Had one fender crack around the rivets last year. Called Demco, they had me send pictures. Then they asked for my shipping address. A few days later two new fenders arrived at NO CHARGE even though there was no warranty. I had to change both as the new fenders were wider and looked like they would accept a 15" tire rather than the 14's I have. Earlier they had sent me a spring stop that was needed by DP's with engine/exhaust brakes, again, no charge.
2009 45' Magna 630 w/Cummins ISX 650 HP/1950 Lbs Ft
Charter Good Sam Lifetime Member, FMCA, SKP
RV'ing since 1957, NRA Benefactor Life, towing '14 CR-V
Mr_D is offline   Reply With Quote
Old 11-06-2012, 05:59 AM   #4
Senior Member
wardy's Avatar
Tiffin Owners Club
Join Date: Dec 2009
Location: Winter Park, Fl
Posts: 478
I just went though this-again. No more Carlisle or Marathon tires for me. The best price I got was through Orlando RV. I paid something like $190 including shipping for the whole assembly. This was for a Kar Kaddy SS. PPL is also a terrific company to buy from. They may be able to supply what you need as well.
2007 Allegro Bus 42 QRP, 400 ISL now 2017 LTV Serenity on a 2016 Sprinter chassis
wardy is offline   Reply With Quote
Old 11-06-2012, 11:02 AM   #5
Senior Member
ronjhall's Avatar

Join Date: Oct 2011
Posts: 1,147
When needed new straps for my KarKaddy SS. I found Ryder Truck Parts was much cheaper than others. As suggested try Demco first. They have been very good for repair parts. But if you have to buy from them they are expensive.
ronjhall is offline   Reply With Quote
Old 01-27-2013, 10:34 AM   #6
Junior Member
Join Date: Apr 2011
Location: Mission, Texas
Posts: 4
I need to replace the wheel/hub assembly on Demco Car caddy. Old one is press fitted in the retainer assembly. Need info on how to get the old one out and new one in. Any help will be appreciated. BillyD.S.

BillyDS is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:16 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.