Demco the manufacture of the Glide-Ride that is used on the "newer" NuWa (Hitchhiker) products is now making a Glide-Ride to retrofit into the "older style.
This type hitch pin box is easily identified as being made of a 8x8 piece of square steel tube cut at a 45* angle and is non-telescoping. The mounting bolts are 10" apart on the horizontal plane and 3" apart on the vertical.
I received mine about a month ago the installation/bolt hole line up was picture perfect. After installation I pulled the 5th wheel around town for about 20 miles and the before/after differences were obvious. When I leave for AZ about the 1st of the year will be the real test.
The Demo site has a very good demonstration video as to how it works. They also make other models to fit other brands/styles of hitch pin box.
http://www.glide-ride.com/
contact-
Brad Vader Poll at 1-800-543-3626 ext. 157 or
Email at-
brad.vanderpol@demco-products.com
Disclamer- I have no interest, financial or otherwise in Demco.
Richard
Linear Mode
