Reese Dual Cam Sway Controll wear
I use a Reese DCSC with my toyhauler.
I have towed no more than 10000 miles with it. I now have 2 flat spots on the top of the round cam at the trunion bar contact point. The flat spots meet and form a V.
Is it OK to switch sides with these cams so the unused round side can be the new contact surface?
Should I use vaseline on them in the future?
On my last trip I was getting some sway, presumably due to looser tension.
Thanks for your advice and/or experiences.
2004 Dodge Ram 5.9L Cummins HO, Auto QC 4WD SRW LWB....2004 HitchHiker II LS, 30.5 RLBG, Dbl Slide....2005 Sandpiper Sport 19ft T21 toyhauler