Strength when moving pin box down

[WWFan]

Hey Senoir Tomas:

Just curious...how many bolts does your WW have?

[Vette Racer]

Sean, made me go look, you turkey!

5 on each side for a total of 10, course, the pin box is totally different. Looks like it means business where the terry looks like they just threw a couple of pieces of angle iron up there to hold the pin so it wouldn't fall out.

I did pull this thing to Colorado with my jeep on behind several years ago so guess its enough. I checked the GVW and it's 13300. The pin box just looked stronger with it slid up inside the angle than it does down in the bottom holes but really, its probably not. Time will tell!

[TXiceman]

Hey Tom, you don't have to worry about it unless you get to your destination and the trailer does not make it as well....

I guess you could get Charlie to drive a spell and you can ride in the bed of the truck and keep an eye on the hitch.... Cause I can guarantee that Charlie won't ride in the back while you drive.

If you want to really get something going....ask if you should consider adding a goose neck adapter to the little trailer.

Hey, have a good time this weekeknd.

Ken

[Vette Racer]

Well, FYI, the hitch worked just fine down like that and the trailer sits almost level so I guess its good to go, not to mention I now have 6 inches over the bedrails instead of 4 so that makes me feel a lot better.

Thanks again for all the conversation on this topic.

Ken, nope, no gooseneck for me and we did have a good time even if it was a little short.