Range hood exterior vents

[hillbillyhtl]

Hello all!

I need to replace my exterior range hood vent, last time out we forgot to lock the damper shut, and lo and behold, it was gone when we got home! I measured the vent best I could without taking it off, cutout, overall dimensions, and damper size, etc. It is a Jensen, but can find no part #, it was probably on the damper that blew off! My question is, are they pretty standard as far as size? I am not finding 1 online that measures the same as my measurements. Also, is it true that Jensen is now elixir?

[nightriderrv]

Look at this and see if one matches up there all for the most part standard

RV exterior range hood vent | eBay

[hillbillyhtl]

Thanks for the reply! Only problem is eBay descriptions are kinda vague. Amazon carries it, but out of stock, so is my local RV dealer!

[hillbillyhtl]

Guess best thing to do is take existing one off and get exact measurements, which I hesitated to do...

[nightriderrv]

If your not using it now just remove it clean it off and put some duct tape over the hole it will stay in place till the new one comes did you see one on the listing that looked like it

post the outside measurments across and down and post a pic we'll find you one unless you just want to wait

[Workshop]

The vent opening should be a standard size in the industry, dependent more on the person who cut it out that day. Is this the vent you are looking for. Here is another source. I have ordered from both without problems.

[hillbillyhtl]

All fixed! I finally found one at my local rv dealer. (they weren't open over the holiday weekend, which is when I was trying to replace it)! Easy replace, although the collar was a bit too deep, but that is what hacksaws are for. Thanks to all for your help, much appreciated!