Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > Toy Haulers Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Thread Tools Search this Thread Display Modes
Old 12-05-2011, 09:46 AM   #1
Junior Member
Join Date: Sep 2011
Location: Athens, AL
Posts: 4
Leveling jack problem

I have a front jack (electric) manufactured by Atwood that will not fully retract manually. It will retract electrically but when I remove the pin and attempt to push the landing leg fully upward to pin it in the highest position it binds. Has anyone removed the landing leg and can it be done by extending the jack fully or does the complete jack have to be removed from the top? I don't have access to my 5th wheel to work on it except when I move it to a campground or someplace othe than where I have it stored. Any help would be greatly appreciated.

jonesrh1 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 12-06-2011, 12:53 PM   #2
Junior Member
Commercial Member
Join Date: Nov 2011
Location: Berkley, MA
Posts: 22
I can get you an answer from one of my techs but im a bit unsure as to what is binding. Does it seem to be an obstruction insode the tube or the lower portion (the leg itself) bent? I can see if you can replace the inner tube with the foot or maybe a whole jack? LEt me know so I can try and get you the right answer first shot. Any pictures or model numbrs will help if convenient to pass along.

Bill Andrews
Sales & Brokerage Manager
Marty's USRV, Inc.
LendingHand is offline   Reply With Quote
Old 12-10-2011, 09:16 AM   #3
Registered User
Join Date: Jan 2009
Location: The Great American Southwest
Posts: 298
It sound like the lower landing leg might be bent and you might be able to remove it from the bottom. You will have to support the frame with a jack, pull the pin and remove the lower section.
You can then try to straighten the leg or get a replacement piece. If you do not have enough room to remove the lower leg, you will have to remove the whole landing leg from the trailer.
Happy Prospector is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
HWH Jack Problem The Bay I MH-General Discussions & Problems 4 03-14-2011 07:41 AM
Problem with Power Gear leveling system dukenrock MH-General Discussions & Problems 1 03-10-2011 05:29 AM
Leveling jack problem BigRedLancer Winnebago Industries Owner's Forum 4 05-05-2009 09:34 PM
Kwikee Jack Problem rick_od Winnebago Industries Owner's Forum 4 08-09-2008 10:11 AM
'05 Pace Arrow 37C Atwood jack problem Fyr Guy Fleetwood Products Owner's Forum 0 07-18-2005 03:42 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 04:53 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.