Making Ramp Cables for the Weekend Warrior

[56Nomad]

Ramp Cables for the new style ramp.

I mounted eyebolts to the ramp door which fit into
the trailer rear frame opening when the ramp door is
closed. I spot welded the eye-bolt opening, so it will
not bend open and used stainless steel washers and nuts to
dress it out. I used steel cables to support the ramp door.

Important rule....... measure twice before you
drill thru the ramp door!

[56Nomad]

Ramp Cables for the new style ramp.

I mounted eyebolts to the ramp door which fit into
the trailer rear frame opening when the ramp door is
closed. I spot welded the eye-bolt opening, so it will
not bend open and used stainless steel washers and nuts to
dress it out. I used steel cables to support the ramp door.

Important rule....... measure twice before you
drill thru the ramp door!

[high desert]

Looks great 56. I love to set the ramp up as a deck. I can't believe that WW only welds the tab on the door if you order the ramp room. It seems like it would be more cost effective to do all the doors the same.

Wes

[56Nomad]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by high desert:
Looks great 56. I love to set the ramp up as a deck. I can't believe that WW only welds the tab on the door if you order the ramp room. It seems like it would be more cost effective to do all the doors the same.

Wes </div></BLOCKQUOTE>

Wes...... do you have any photos of the tab that is welded on to the door?

[high desert]

No.....but I can take one.....hold on.

[Grizwald2]

Looks very nice 56. add one more to the list.

Don

[high desert]

Brrrr..is it cold out there or what? Wind chill of 32 degrees.

Here's a pic of the ramp tab.



Wes

[56Nomad]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by high desert:
Brrrr..is it cold out there or what? Wind chill of 32 degrees.

Here's a pic of the ramp tab.



Wes </div></BLOCKQUOTE>

Dang..... you can't weld that little sucker on
after the fiberglass has been added

[Grizwald2]

Got me wondering if you could still weld the tab on without burning the fiberglass or melting that molding?

Don