Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > Toy Haulers Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-19-2017, 11:50 AM   #1
Junior Member
 
Join Date: Aug 2016
Location: Weatherford, TX
Posts: 15
Slide-out Issue

My wife and I full-time in a 2008 Fuzion with 3 hydraulic slide-outs (operated by a single switch). Recently, a tennis ball got caught in the kitchen slide-out. I brought the slide back in and removed the ball. However, now the slide will not fully extend; it stops about 1.5" short.
I have fully retracted all three slides and put them back out to no avail. The kitchen slide stops short every time. I there a way to adjust the slide-out back to it's correct posItion?
Thank you!
__________________
USN, Retired
2008 Ford F-350, 2008 40' Fuzion
2002 Honda Goldwing
GoatLocker is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-19-2017, 09:14 PM   #2
Senior Member
 
Join Date: Aug 2016
Posts: 3,400
I don't think it needs adjustment. The system probably needs to be reset and resynced. My Your manual will walk you through how to resync.
marjoa is offline   Reply With Quote
Old 09-21-2017, 03:15 PM   #3
Senior Member
 
Gigattime's Avatar
 
Join Date: Mar 2016
Posts: 1,755
If they are Lippert Components, then I would give them a call and see if they can help you troubleshoot.

The sync in our 5er is not for the hydraulic slides it's for Schwintek slide. I found that out when I accidentally reset it while having an issue with my 6-point leveling system while traveling this summer. Lippert was able to help me get everything back in line and troubleshoot a faulty solenoid. Great help by them and Grand Design!
Gigattime is offline   Reply With Quote
Reply

Tags
slide



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide adjustment BAL accu-slide (cable type) - alignment issue slide shifted forward cb1000rider RV Systems & Appliances 8 08-08-2017 06:36 PM
Slide out cover over fridge slide out southwest 5th Wheel Discussion 8 08-21-2015 04:33 PM
Slide Controller Issue, but maybe slide motor issue also Corwin Newmar Owner's Forum 8 07-16-2012 11:41 AM
WH Slide out side slide out clearence different. sumterjim Damon 2 03-24-2010 04:33 PM
Southwind 36D Issue after issue after issue.... fixn2gocamp Fleetwood Owner's Forum 4 10-21-2009 07:05 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 09:37 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.