1st the TV. I found a 19 inch LCD widescreen that fits pretty good and pivots forward for better viewing. I wanted an LCD due to the lighter weight on the cabinet and the lower current pull.
Next the DVD VCR Combo and some moding to the legs of the shelf in the cabinet. I needed the VCR DVD to be up higher in order to sit further back in the cabinet to fit. The back of the outside lights is in the way in the cabinet. I also allows for the videos to be stored on end for easier access.
Next, my inverter solution. A 400 watt inverter into the cigarette lighter plug behind the TV's. One, this requires as little modifications to the trailer as possible and two, it was cheap. The inverter was $20 after a $5 rebate at pepboys. The TV is 1.8 amps and the dvd/vcr combo pulls 24 watts. So I am only pulling 224 watts on this circuit.
Next the IQ charger for the converter, one screw two phone jacks... I wish they all went in like this.
Next sewer hose holder extension...Self expanatory. I should be able to get a 20ft hose in here now.
Lastly, the pole holder for the 22ft flag pole on top of the 12 ft ladder. I should be able to spot the rig now.
Still left on the list before the next trip, The gas tanks fuel valve mod and quickie flush in the black tank.
Fun weekend. Thanks