12 volt wiring

[chuckiehm]

Does anyone have a picture or diagram of the back of a 12 volt light and rocker switch for reference in wiring.

Thanks Chuck

[Skip426]

Quote:

Originally Posted by chuckiehm Does anyone have a picture or diagram of the back of a 12 volt light and rocker switch for reference in wiring. Thanks Chuck

Chuck , nearly every brand of switch or year of MH is going to have a different , plug in or wiring placement . Can you list exactly what your after . Year, chassis, MH ?

[chuckiehm]

I'm rewiring a 63 Kenskill 13 ft trailer and need to see a wiring diagram of a 12 volt toggle switch and a 12 volt receptacle.

[Skip426]

Quote:

Originally Posted by chuckiehm I'm rewiring a 63 Kenskill 13 ft trailer and need to see a wiring diagram of a 12 volt toggle switch and a 12 volt receptacle.

A 2 terminal , 12v toggle switch is non, directional, power/load side interchangable, a 3 terminal, switch , the center is power, load out is then opposite the lever possion. Lever up , the lower terminal is power to load; lever down, upper terminal is. If you have purchased an illuminated switch , wiring diagram should be on the box. 12 volt receptical ( cigar lighter type) center is power( usually a brass threaded stud, that requires a special push on wire end connector) , housing is ground( Spade connector) Hope this helps , Good Luck