Originally Posted by Traveling
Don't think I have flip-able axle setup. Do I just add spacers?
You have torsion axles. If they are Dexter Torflex brand, then you can probably buy a lift kit from Dexter that will raise the trailer 2 5/8th inches.
Dexter Axle - Trailer Axles and Running Gear Components - #10 Torflex Lift Kit
If they are some other brand, contact the manufacturer to see if a lift kit is available.
I would not simply add spacers. Too dangerous. But if a lift kit is not available for your axle, then I might fabricate a different side mount hanger to lower the torsion bar a few inches.