Marking grey, black, and potable water handles.

[Some1]

So on our new trailer all the handles are tucked away up under the side of the trailer. They are colored accordingly but you would have to either get on the ground or bend way over to see which one you are pulling.

So I was wondering if anyone knows where you can get decals or markers of some sort so as to not have to go off of memory of which handle is were so as not to pull the wrong one. (ie doing the grey befor black) Also having to fumble around with your hands reaching and grasping at air for a good 5 or so minutes is no fun either.

I've checked amazon and ebay but haven't been able to find anything yet.

Thanks all.

[MarkQ]

Demo labeler from any supply store.

[MarkQ]

Dymo (thanks, spellcheck)

[cb1000rider]

Ask Keystone. The like to mislabel the valves on their trailers.

Same as above. Label printers work great.

[sprayman]

i have an outback, the handlles are not labeled, the labels are on the

bottom edge of the trailer, the tank is directly behind that label.

suggest you find a low stool and be comfortable. We did not smell anything.

Jim

[sprayman]

Originally Posted by cb1000rider

ask keystone. The like to mislabel the valves on their trailers.

Same as above. Label printers work great.

can't prove that by me. Labels are onthe side of the trailer

[Pete1985]

Label printers work great just put the label on the side of the trailer and your done.