Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > Travel Trailer Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-09-2008, 05:16 PM   #1
Junior Member
 
roentgen's Avatar
 
Join Date: Jul 2007
Posts: 11
Hi Guy's:

Getting old these days, and was thinking of buying a pwr tongue jack. I have a Jayco 27BH. I dont know what size the A frame hole is 2", or 2 1/8". It looks like these pwr jacks come in 3000, 3500, and 400lb wt lifting capacity. Depending on thatsome only fit in certain A frame holes.

Any help appreciated.

Tks Roentgen
__________________

__________________
roentgen is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-09-2008, 05:16 PM   #2
Junior Member
 
roentgen's Avatar
 
Join Date: Jul 2007
Posts: 11
Hi Guy's:

Getting old these days, and was thinking of buying a pwr tongue jack. I have a Jayco 27BH. I dont know what size the A frame hole is 2", or 2 1/8". It looks like these pwr jacks come in 3000, 3500, and 400lb wt lifting capacity. Depending on thatsome only fit in certain A frame holes.

Any help appreciated.

Tks Roentgen
__________________

__________________
roentgen is offline   Reply With Quote
Old 09-13-2008, 03:51 PM   #3
Junior Member
 
Join Date: Jan 2003
Location: Raleigh, NC
Posts: 5
I had to replace my electric jack and the old one was marked with the size. See if your manual jack post has its size stamped on it. Or, put down your stabilizers and remove the jack so you can measure the size of the hole. It's attached with three bolts.
Not a complicated job.
__________________
GlennB. is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
POWER GEAR JACK PAD RJB National RV Owner's Forum 5 10-21-2008 05:16 AM
Power Gear Leveling Jack Problem Mike R Fleetwood Products Owner's Forum 7 07-27-2008 11:14 AM
help!! tongue jack and genny not working!!! learnem RV Systems & Appliances 6 09-01-2006 11:48 AM
Power Gear Jack Problem max49 MH-General Discussions & Problems 10 10-21-2005 05:38 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 11:06 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.