|
08-03-2005, 05:52 AM
|
#1
|
Junior Member
Join Date: Mar 2005
Location: Fairfax, VA
Posts: 23
|
Just bought a new TV (Dodge 1500) and it rides significantly higher than my TT (2002 Coleman aravan, dual axle). RV mechanic recently recommended that I "flip" my leaf spring axle links (not sure I'm using right terms?)to raise the trailer suspension.
Is this safe to do? If so, what's the best way to do this? Mechanic indicatd that I could remove the bolts holding the end of the leaf springs to the "link", let the link rotate downward, then re-attach the leaf spring.
Any help would be appreciated.
__________________
2005 Dodge 1500
2014 Hornet 280 LHS
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
08-03-2005, 05:52 AM
|
#2
|
Junior Member
Join Date: Mar 2005
Location: Fairfax, VA
Posts: 23
|
Just bought a new TV (Dodge 1500) and it rides significantly higher than my TT (2002 Coleman aravan, dual axle). RV mechanic recently recommended that I "flip" my leaf spring axle links (not sure I'm using right terms?)to raise the trailer suspension.
Is this safe to do? If so, what's the best way to do this? Mechanic indicatd that I could remove the bolts holding the end of the leaf springs to the "link", let the link rotate downward, then re-attach the leaf spring.
Any help would be appreciated.
__________________
2005 Dodge 1500
2014 Hornet 280 LHS
|
|
|
08-03-2005, 08:20 AM
|
#3
|
Moderator Emeritus
Ford Super Duty Owner
Join Date: Aug 2000
Location: Bryan, TX when not traveling.
Posts: 22,948
|
Why not just get a dropped receiver shank for the truck?
Ken
__________________
Amateur Radio Operator (KE5DFR)|No Longer Full-Time! - 2023 Cougar 22MLS toted by 2022 F150, 3.5L EcoBoost Tow Max FX4 Lariat Travel with one Standard Schnauzer and one small Timneh African Gray Parrot, retired mechanical engineer
|
|
|
08-03-2005, 08:36 AM
|
#4
|
Junior Member
Join Date: Mar 2005
Location: Fairfax, VA
Posts: 23
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by TXiceman:
Why not just get a dropped receiver shank for the truck?
Ken </div></BLOCKQUOTE>
That was my first plan, but the mechanic indictated that the rig would handle better if the TV & TT were roughly the same height. Does this make sense??
After he suggested this, I thought it would also be nice to have the extra ground clearance on the TT. It sits pretty low right now.
__________________
2005 Dodge 1500
2014 Hornet 280 LHS
|
|
|
08-03-2005, 10:58 AM
|
#5
|
Senior Member
Jayco Owners Club
Join Date: Dec 2001
Location: Rhode Island
Posts: 123
|
If you don't have a problem with the back of the trailer scraping the road then the drop hitch is the most cost effective route.
However, flipping the axles does not appear to cause any problems other than the bottom step is higher. My 5th wheel w/ "flipped" axles tows w/o problems.
SteveB
__________________
2015 RAM CC LB DRW CTD 68RFE 3.73
SOLD-'01 Dodge Ram 3500 CTD HO
'04 Jayco 28.5 RKS
|
|
|
08-05-2005, 07:13 AM
|
#6
|
Senior Member
Join Date: Jun 2005
Location: orange county, CA
Posts: 465
|
I have had two 5ers with flipped axles and have had no problems. It's a solution you can fix in your driveway with the right tools and a few hours. The only drag is you might have to to from a two steps entry to a three step. Other than that it's a cheap fix.
Rod
__________________
02 F250 SD Diesel 4x4, 6.5 lift, Banks ex, K&N, Edge progrmr
WW LE3505
|
|
|
08-09-2005, 11:27 AM
|
#7
|
Junior Member
Join Date: Feb 2004
Location: Huntsville On. Canada
Posts: 17
|
I don't know why you would want to raise the height of your trailer when a drop hitch would be cheaper and in my opinion safer. How by raising the trailers roll center could it not have a negative effect on handling,by making it more top heavy and easier to roll over. The other drawback to raising the trailer would be the increased wind drag.
|
|
|
08-09-2005, 11:48 AM
|
#8
|
Senior Member
Texas Boomers Club
Join Date: Jul 2000
Location: Cypress, Texas USA
Posts: 8,854
|
Something else to consider is that flipping the leaf spring shackles as your mechanic suggested puts the shackles in compression instead of tension, as they were designed to operate. The shackles will buckle in column loading in compression at a significantly lower load than they would pull apart in tension.
Rusty
|
|
|
08-09-2005, 07:39 PM
|
#9
|
Senior Member
Join Date: Apr 2000
Location: Lake Almanor, CA USA
Posts: 419
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> That was my first plan, but the mechanic indictated that the rig would handle better if the TV & TT were roughly the same height. Does this make sense?? </div></BLOCKQUOTE>
No, it doesn't make any sense. One of the first "laws" of towing is that both the tow vehicle and the trailer are <span class="ev_code_RED">level.</span> If the trailer rides lower, and level, in relation to the TV, its center of gravity is lower, making it more stable and easier to tow.
Take the advice of those of us who have and are dropping the hitch to level the towing height of the trailer. My rig currently drops the hitch, and it is a weight distribution hitch, approx. 6" to tow level.
__________________
Paul <?)))>< Lake Almanor, CA
2002 Thor Tahoe 23FBGL TT, 28'
|
|
|
08-11-2005, 11:22 AM
|
#10
|
Junior Member
Join Date: Mar 2005
Location: Fairfax, VA
Posts: 23
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by RustyJC:
Something else to consider is that flipping the leaf spring shackles as your mechanic suggested puts the shackles in compression instead of tension, as they were designed to operate. The shackles will buckle in column loading in compression at a significantly lower load than they would pull apart in tension.
Rusty </div></BLOCKQUOTE>
That's one of the issues I was worried about, i.e. changing the way the suspension would handle loads.
Thanks for all the info. Think I'll just lower my WD hitch another notch or two.
__________________
2005 Dodge 1500
2014 Hornet 280 LHS
|
|
|
10-24-2005, 07:45 PM
|
#11
|
Member
Join Date: Oct 2005
Location: LI, New York
Posts: 53
|
Flipping the leaf springs is a common practus here on Long Island in NY. We tow our trailers on to our beaches and the exrta clearence is a plus. I have never heard of any problems related to doing this.
__________________
2003 Cardinal 31LE
Black 1997 F250 H/D 4X4
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|