 |
04-04-2011, 09:18 AM
|
#1
|
|
Junior Member
Join Date: Jun 2010
Posts: 22
|
RV repair in the Dallas area.
I'm in need of having a roof mount AC installed on my coach. It is a 2010 Earthbound Goldenridge. It came with a basement unit from the factory. So this repair facility will need to cut into the roof. I am looking for a reputable installer in the Dallas area. Any help is greatly appreciated.
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
04-04-2011, 09:31 AM
|
#2
|
|
Senior Member
Workhorse Chassis Owner
Join Date: Oct 2007
Posts: 768
|
Quote:
Originally Posted by jfletcher72
I'm in need of having a roof mount AC installed on my coach. It is a 2010 Earthbound Goldenridge. It came with a basement unit from the factory. So this repair facility will need to cut into the roof. I am looking for a reputable installer in the Dallas area. Any help is greatly appreciated.
|
Before you have someone connected with RVs do the job, I recommend you check with several HVAC folks to see if they would do it. The only thing is they may not want to do the roof. However, if they will do it, it will generally be cheaper and more reliable as that is what they do for a living, not mess with RVs.
__________________
Denny & Kylene, Abby (Golden) and Josie (Sheltie),
2004 Itasca Suncruiser 38R, W22, Ultrapower
2012 Jeep Wrangler Sport Unlimited
|
|
|
|
|
04-04-2011, 09:38 AM
|
#3
|
|
Senior Member
Join Date: Aug 2010
Posts: 1,495
|
I would try the Foretravel plant in Nacadoches. They do superb work and this would be right in line with their experience. Their shop labor rate is $102/hour which is considerably lower than almost anyone else. I shudder to think what kind of work HVAC people would do on the top of your RV, having little or no experience with the precision work required both cosmetically and weatherproof, along with the wind force loads encountered while mounted on the roof beams. They are normally eminently qualified for normal HVAC but I would request testimonials first.
|
|
|
|
|
04-04-2011, 11:54 AM
|
#4
|
|
Junior Member
Join Date: Jun 2010
Posts: 22
|
need a good RV repair/installer
Let me clarify... It was suggested by the manufacturer that I have a roof mount 15K AC unit installed since they admit their basement heat pump was insufficient. I am in a suburb north of dallas ...so something within 50 miles or so of dallas would be preferred. They recommended RV World, RV Doctor, Vogt, and United RV.
|
|
|
|
|
04-05-2011, 11:18 AM
|
#5
|
|
Senior Member
Damon Owners Club Freightliner Owners Club
Join Date: Mar 2006
Location: North East Texas
Posts: 4,946
|
mmclains in denton/lake dallas
__________________
USN Retired, Life time member of the DAV.
Enjoying the 2008 Damon Tuscany 4056, #3998 no your eyes are fine, there are really 6 slides
2022 F150 King Ranch or 2012 Edge toads
|
|
|
|
|
04-09-2011, 11:34 AM
|
#6
|
|
Senior Member
Join Date: Aug 2008
Posts: 364
|
This is not a recomendatio , just information. Ther is a Camping World just north or Denton on I 35E. I've never had any repari or installatio work doen there and know knothing of ther expertise or prices.
__________________
2014 Wildwood 27RKSS 2004 Nissan Titan Pilot Steve
Co-Pilot Marlene Furry Four Leg children: Fancy Lab/Chow, LB Little Bit, Maltese, Rocky, Border Terrier
|
|
|
|
|
04-09-2011, 09:41 PM
|
#7
|
|
Senior Member
Join Date: Aug 2004
Location: Wherever we are
Posts: 4,288
|
Check with Scott Wirkler at United RV in Fort Worth.
Joe
__________________
'16 40QBH Phaeton
'21 Sahara HA toad
'15 38RSSA Mobile Suites--traded
'05 36TK3 Mobile Suites--retired but not forgotten
|
|
|
|
|
04-10-2011, 12:36 AM
|
#8
|
|
Senior Member
Join Date: Apr 2010
Posts: 691
|
I know that i wouldn't want to Let C/W be cutting any holes in the roof of my RV from past experience with various of their locations. Did the mfg state where the roof was reinforced for cut out and where/how to get power fed to it?
|
|
|
|
|
04-11-2011, 09:54 AM
|
#9
|
|
Junior Member
Join Date: Jun 2010
Posts: 22
|
The manufacturer is working with CW to determine placement and wiring. It will be to their specifications.
Quote:
Originally Posted by RVhauler
I know that i wouldn't want to Let C/W be cutting any holes in the roof of my RV from past experience with various of their locations. Did the mfg state where the roof was reinforced for cut out and where/how to get power fed to it?
|
|
|
|
|
|
04-11-2011, 10:15 AM
|
#10
|
|
Senior Member
Join Date: Sep 2007
Location: texas
Posts: 2,422
|
i would go with united off ariport frw. top notch
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
