Slide clutch adjustment
Does anyone have any expertise on slide motors? I need to know if the sensitivity of the clutch on the slides electric motor can be adjusted? The slide system is a Lippert Components system but the manual does not address whether or not the clutch has an adjustment. I have a 15’ slide and, when closing the slide, the slide rollers need to slightly lift the bottom of the slide so it rolls over the top of the carpet. This initial lift is often too much for the clutch & it clicks and does not pull the slide in. If I push on the outside while the switch is activated then I can get it over the proverbial “hump” and the operation works fine the rest of the way.
2004 Chevy Silverado 2500HD - Duramax/Allison
2009 Komfort Trialblazer 285S