1. There should be two "T" handles located near to where you hooked up the septic hose. One is for gray and the other is black water.
2. The potable water on the entrance side probably fills the clean water tank. You will need to turn on the pump to get water pressure in the rig. The other one on the driver side should be city water. Hook up a garden hose here and open the valve. This will give you continuous city water inside the rig.
3. There should be a control panel inside the trailer. On it will be two switches one labeled "Electric" and the other "Gas". With shore power applied just hook up the water or turn on the electric pump then turn on the "Electric" switch. To heat with propane hit the "Gas" switch. Just make sure that you have water in the hot water tank.
Hope this helps.
__________________
John Price
2016 Denali 289RK w/a Hensley Arrow Hitch
2015 Dodge Ram 2500 Cummings
|