Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > Travel Trailer Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 12-28-2015, 02:39 PM   #1
Junior Member
 
Join Date: Dec 2015
Posts: 3
Trying to locate a manual crank for slide-out

Hi, my name is Bob and I'm new to this site. I'm trying to locate a manual crank handle for an electric slide-out on a 1995 Terry Travel Trailer. Any help from anyone is sincerely appreciated. Thanking you in advance.
Sincerely, Bob
__________________

__________________
rbest53 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 12-29-2015, 10:51 AM   #2
Senior Member
 
Skip426's Avatar


 
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 14,970
Bob, Welcome to iRV2.

Is there any manufactures info on the electric drive on the trailer? Power Gear ?
If you can't find a name then could you post a picture of the power drive set up.
Info on posting photos, to your post is in the " FAQ " drop box in the blue bar , below your welcome message.
__________________

__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
Skip426 is offline   Reply With Quote
Old 12-29-2015, 12:42 PM   #3
Junior Member
 
Join Date: Dec 2015
Posts: 3
Hi Skip426,
Thanks for your quick response. These are the only photos I have. The "hole" just forward of the tire is where the crank goes. Hopefully you can help.
Attached Thumbnails
Click image for larger version

Name:	IMG_0059.jpg
Views:	65
Size:	355.9 KB
ID:	115198   Click image for larger version

Name:	IMG_0060.jpg
Views:	61
Size:	277.1 KB
ID:	115199  

Click image for larger version

Name:	IMG_0061.jpg
Views:	64
Size:	233.8 KB
ID:	115200   Click image for larger version

Name:	IMG_0063.jpg
Views:	57
Size:	175.9 KB
ID:	115201  

__________________
rbest53 is offline   Reply With Quote
Old 12-29-2015, 12:50 PM   #4
Senior Member
 
Join Date: Sep 2012
Posts: 5,950
FWIW I would be poking at it with a flashlight and some tools. IT's probably some kind of common shape that you can then deal with.
__________________
nothermark is online now   Reply With Quote
Old 12-29-2015, 01:00 PM   #5
Registered User
 
Join Date: Sep 2014
Posts: 2,313
If you can find the right "socket" you might be surprised what the little rechargeable impact drivers will do.
__________________
okcnewbie is online now   Reply With Quote
Old 12-29-2015, 10:53 PM   #6
Senior Member
 
Skip426's Avatar


 
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 14,970
From the parts I can see of the slide drive , I'm sure you'll find it was manufactured by Power Gear, ( name will be on the electric motor) and the manual drive should be a 3/4" socket.

JMHO: This trailer looks like it has been stationary for a LONG time. If you're considering moving it , there is a lot of work to be done first. Tires , brakes and wheel bearings, come to mind.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
Skip426 is offline   Reply With Quote
Old 12-30-2015, 12:31 PM   #7
Senior Member
 
wa8yxm's Avatar
 
Damon Owners Club
Workhorse Chassis Owner
Join Date: Mar 2009
Posts: 22,792
Under the slide there are some rods with cables warpped about them, Forget those, there are also what appear to be a pair of beams.

If those beams have "toothed" bottoms then that is a rack and pinion system and most likely Power gear.. if this is the case look for the pinion gears (Either of 'em" you should see a square shaft connecting them.. either to each other or to the power unit transmission If so good.

Now go to the one on the right as you face it.. Look on the other side of the pinion or tansmission you may see a 3/4" nut.. Standard ratchet wrench with 3/4" socket fits.
__________________
Home is where I park it!
wa8yxm is offline   Reply With Quote
Old 01-05-2016, 08:50 AM   #8
Member
 
Join Date: Mar 2013
Posts: 98
Have you resolved the problem yet? Ours is similar but the crank is not a socket but a tube with opposing slots that catch pins in a shaft. I wish it would take a socket because the tube is swelling at the end and tries to hang up in the connection hole. Fortunately it is not needed at this time.
__________________
Chowboy is offline   Reply With Quote
Old 01-06-2016, 11:37 AM   #9
Junior Member
 
Join Date: Dec 2015
Posts: 3
No, not yet. Looking for an RV field service tech for assistance now as other items need to be addressed as well. I think we have the same problem. When I look real close, I think I see the same pegs on the shaft which means the crank handle I need would slide over the shaft to engage the pegs. As soon as I get a Tech out there, I'll post an update.
__________________

__________________
rbest53 is offline   Reply With Quote
Reply

Tags
cat, manual, slide



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford F-53 Chassis Manual & Owners Manual "007" Ford Motorhome Chassis Forum 16 11-15-2017 05:14 PM
Auto Park Brake converted to Manual Lever the_dieter Workhorse and Chevrolet Chassis Motorhome Forum 181 09-10-2015 08:13 AM
In search of owner's manual for 1998 Georgie Boy Maverick CurtGrimes Class C Motorhome Discussions 7 12-26-2014 09:18 AM
Anyone Have TX DOT "yellow" Owner's manual for Non-Com Class A? Statgeek Class A Motorhome Discussions 0 11-12-2014 08:01 AM
2005 45' 4slide Desiel Travel Supreme Select Owners Manual and Pdf's wordofgodspe Travel Supreme Owner's Forum 12 09-12-2014 10:54 AM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 07:15 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.