Bedroom TV in a Slide

[cartpix]

I have been looking into Directv in my coach. I was wondering how to set up the receiver, in the bedroom slide. I was thinking of a Genie, with a wireless client, but found out you can only have 1 Genie per account. Since there will be people, still at home, I can't take it with me. What is the best way to run coax to the slide?

Jeff

[LarryW21]

So the cable needs to "stretch" when the slide is opened?

[cc8375]

I ran a HDMI cable, from BR tv cable in a closest, thru the closet, behind drawers and thru floor,outside to the rail on slide. See if there is any wire chase running from that slide to the outside. From there I ran the chassis rail to the from engine compartment. From the engine compartment I went up the window post to the AV cabinet.

[cc8375]

Here is a thread showing pics on going thru floor and running outside to get to the coach rail.
http://www.irv2.com/forums/f103/2014...on-238055.html

[cc8375]

The cable is attached to loop the goes OUT and In when the slide is retracted or extended. I actual just cable tied the cable to the Sealtite.

So there is No Stretching of the cable.


See previous Thread for pics.

[cartpix]

Thank you cc8375, I'll have to climb under it & have a look. I know there has to be an OTA coax, running back to the bedroom TV. If I chase it, I can piggyback the Sat cable, through the same path.

Jeff