Community Forums

MJ Bie · 04-13-2014, 03:44 PM

We have a 09 Winnebego Adventurer 38N. The Jensen TV in the bedroom does not respond to a remote. Want to replace TV but don't see how to take it off the wall mount. TV is mounted on wall between 2 closets with a shelve below the TV. Nearly impossible to see behind, much less get a arm and hand behind.

**CountryFit** · 04-13-2014, 08:58 PM

you might want to call the manufacturer tech help line. normally they would give you a clue. when i took my old tube tv off, it was held by 4 screws, obviously yours is different.

Mtmoi · 05-01-2014, 05:30 PM

Replaced bedroom TV in 07 Tour recently and it was tough job. Key was a Torx (star) screw reachable only from bottom center with a long Torx tool with a T handle (don't remember the number but it was one in a $10 set bought at Harbor Freight). Easier to get the tool inserted, at least on the Tour, if you first remove the valence on the shade below the TV.

Once you get that screw loose, can swing TV and bracket upwards and get at the mounting screws. Note that you will need a new TV with the same distance between the mounting holes. Had to return a 32" and buy a smaller TV to get matching screw holes. Plate was not wide enough to drill wider pattern.

ddw1949 · 05-05-2014, 04:34 PM

I have a 2009 Canyon Star with a 32 inch Samsung TV mounted in the front of the RV over the windsheild and was wondering if anyone had ever removed theirs? I can't figure out where the locks are located that hold the LCD television in place.