New LED Flat screen, need some quick answers

[ccutaia]

Has anyone had any probelms with the 4 threaded mounts in the back of the flat screens as far as holding power????

[rgvtexan]

NO. My TV had metal inserts for the screws, Going on 5 years.

[docj]

Just make sure that you use the correct size bolts. Regardless of the TV or its size, all the bolts are metric sizes.

[Jim A]

No problem in 14+ years with a 37" Panasonic plasma using the 4 threaded mounts. And that is likely heavier than your LED.

[mrboyer]

I did on my first one. Pulled out the metal insert. Since i use fender washers between the tv case and the metal mount. No further problems in about 120,000 miles.

[Spdracr39]

Use the factory supplied bolts.Too long can be bad for obvious reasons and too short can pull the threads out.