We replaced our bedroom tv with a Vizio 29" flat screen.
The tv works fine, but we can't get a dvd to play, it says no signal
We are sure the cables are hooked up correctly, and dvds played with the
old tv. It shouldn't be this difficult.
Any suggestions what to try to get this working?
My wife won't quit till we get it working, help?!
Thanks
Sonny
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I know you said you know the cables are hooked up right, but I need to ask another obvious question. Did you use the remote to select the proper input on the TV?
Are you using the same cables or did you change to an HDMI for example. In either case go to the television setup menu and see if the inputs are activated. New televisions have the ability to ignore certain inputs if not used. You can even change the labels for the inputs such as having them show DVD versus input 2 etc.
__________________
Certified Senior Electronic Technician, Telecommunications Engineer, Telecommunications repair Service Center Owner, Original owner HR 2008
WE have to have our tv on AV
No we didn't change the cables
ANd we have watched tv, so we have the proper input selected or that wouldn't work either.
Could it have something to do with channel selection? This tv isn't hooked up to cable so we have to choose, 3-1
Sounds like you're trying to use the digital OTA tuner to watch a DVD going through an RF distribution box. You're going to need to change the input to the analog tuner and then select channel 3.
__________________
2008 King Aire 4562, Spartan K3(GT) w/ Cummins ISX 600
2014 Jeep Grand Cherokee Overland 5.7L V8 Hemi w/ Blue Ox Aventa LX Tow Bar and baseplate, SMI Air Force One brake
Linear Mode
