I just bought the Winegard PW X1 for dish network.It has two outputs for 2 TVs but my 2008 four Winds only has one coax input on the side of the RV.Is there a splitter i can use?I called Winegard but we have been playing phone tag cause i cant get calls were i work(govtAgency)THANKS!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Your Pathway must connect directly to a satellite receiver. Then the receiver connects to your TV. It has two outputs for two receivers and TVs on different channels. The one cable connection on your rig runs thru the antenna booster and then to your TVs. You can not use this for satellite.
You can't. Each receiver must have it's own coax from the antenna to the receiver.
The X1 is really a 1 receiver antenna. Although it does have a second LNB output, using a second receiver with the X1 is to me, a very annoying proposition.
Yup, need a second receiver and wiring to get it connected to the antenna. Both TV have to watch channels that are on same satellite.
__________________
Vince and Susan
2011 Tiffin Phaeton 40QTH (Cummins ISC/Freightliner)
Flat towing a modified 2005 Jeep (Rubicon Wrangler)
Previously a 2002 Fleetwood Pace Arrow 37A and a 1995 Safari Trek 2830.
Linear Mode
