Pictures of the Winegard Slimline Install and LCD ugrades.

[03HRVacationer]

Hi all, I put up some pictures of the dish install on our blog. Check them out and I'll answer any questions I can.

Al

www.morancy-adventures.blogspot.com

[03HRVacationer]

Hi all, I put up some pictures of the dish install on our blog. Check them out and I'll answer any questions I can.

Al

www.morancy-adventures.blogspot.com

[moisheh]

Nice install:

Did you worry about getting some mounting screws into a roof rafter or just plunked it down and mounted? How were you able to fish the wires to the satellite dish and the controller box? I have an existing dome dish that I want to remove but am concerned that I may not be able to get the wires into the roof area where the existing wires are located. Thanks

[03HRVacationer]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by moisheh:
Nice install:

Did you worry about getting some mounting screws into a roof rafter or just plunked it down and mounted? How were you able to fish the wires to the satellite dish and the controller box? I have an existing dome dish that I want to remove but am concerned that I may not be able to get the wires into the roof area where the existing wires are located. Thanks </div></BLOCKQUOTE>


Moisheh, Between the putty tape and roof caulking I had no worries about hitting any sturcture. Every screw bit down hard. Once the CRT was out of the way there is tons of room to get at the wiring, as you see I came forward with the penatration, I was able to reach up in and grab the wires and run as needed.

Thanks for looking.

Al