R4SL, what does "FAIL EL" mean?

[CountryFit]

Hi, I am using update wizard to switch R4SL from DTV to Dish. After install, I got this error. Does anyone know what the culprit might be? Thanks.



the last line keeps rolling...

[CountryFit]

i shut it down and about half an hour later restarted, this time it went smoothly. i came back to delete my op but realized i couldn't... so here is the new rolling (sorry for too long):

Limit Switch Status: PASS
RF: Normalize ~ First Lock
RF: SYSTEM_READY
RF: Normalize ~ BER: 2182
RF: Normalize ~ BER: 778
RF: S,A,L,U,V

RF: S,A,L,U,V
RF: Normalize ~ First Lock
RF: Normalize ~ BER: 2682
RF: Normalize ~ BER: 582
RF: Normalize ~ BER: 343
RF: L,X
RF: Normalize ~ First Lock
Satellite Found: AZ = 220.9, EL = 49.7, RF = 1957

*** Initializing Finetune ***
RF: I,1,23572,96,2577,1
RF: I,1,23570,91,2575,1
RF: I,1,23570,76,2575,1
RF: I,1,23570,84,2575,1
Signal Sample: AZ = 220.86, EL = 49.68, Cur = 23570, Max = 0
RF: I,1,23568,86,2572,1
RF: I,1,23566,86,2570,1
RF: I,1,23568,90,2572,1
RF: I,1,21358,87,700,1
Signal Sample: AZ = 221.36, EL = 49.68, Cur = 23015, Max = 23570
RF: I,1,23566,92,2569,1
RF: I,1,23564,96,2567,1
RF: I,1,21908,89,910,1
RF: I,1,22050,89,1052,1
Signal Sample: AZ = 220.36, EL = 49.68, Cur = 22772, Max = 23570
+POS: 220.4 49.7 1259
RF: S,A,R,U,V
Polarization Change - Restart FineTune
*** Initializing Finetune ***
RF: Normalize ~ First Lock
RF: I,1,22758,638,2579,1
RF: I,1,24012,638,3833,1
RF: I,1,22748,638,2569,1
RF: I,1,22754,272,2575,1
Signal Sample: AZ = 220.86, EL = 50.18, Cur = 23068, Max = 23570
RF: I,1,22778,543,2598,1
RF: I,1,22782,555,2602,1
RF: I,1,22784,545,2604,1
RF: I,1,22776,529,2596,1
Signal Sample: AZ = 221.36, EL = 50.18, Cur = 22780, Max = 23068
RF: I,1,22692,762,2511,1
RF: I,1,22688,805,2507,1
RF: I,1,22684,879,2503,1
RF: I,1,24056,879,3876,1
Signal Sample: AZ = 220.36, EL = 50.18, Cur = 23030, Max = 23068
RF: I,1,22712,729,2533,1
RF: I,1,22710,757,2531,1
RF: I,1,22708,734,2529,1
RF: I,1,23974,759,3795,1
Signal Sample: AZ = 220.86, EL = 50.68, Cur = 23026, Max = 23068
+POS: 220.9 50.6 2600
RF: I,1,22752,630,2573,1
RF: I,1,22750,654,2571,1
RF: I,1,22756,630,2577,1
RF: I,1,22748,619,2569,1
Signal Sample: AZ = 220.86, EL = 49.68, Cur = 22751, Max = 23068
Signal Peaked: AZ = 220.86, EL = 50.18, RF = 23068
*** Network ID Check ***
+POS: 220.9 50.1 2624
+POS: 220.9 50.1 2625
RF: Y,0x0000
*** Tracking DSS_101 ***
Avg: 50.1 0.0 0.0 0.0 0.0
RF: BER: 665 ID's: 0x0000 0x0000 0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF
RF: NID time: 5.1 Sec
+POS: 220.9 50.1 2631
+POS: 220.9 50.1 2619
RF: Normalize ~ Out of range
RF: S,A,L,U,V
RF: Normalize ~ First Lock
+POS: 220.9 50.1 2636
+POS: 220.9 50.1 2625
+POS: 220.9 50.1 1907
+POS: 220.9 50.1 2401
+POS: 220.9 50.1 2626
RF: S,A,R,U,V

(it repeats from RF: Normalize ~ First Lock)

don't know what these are telling me but guess it might work. i have a dish 811 receiver, not to expect i can get pics but intended to get signal strength. but so far it's none. i guess i would need a vip 211k...

anyone can tell how to interpret these?