setting dish network box

[Bugzme]

my sat. dish can only pick up 1 sat. at a time. It is set to 110 and i would like to change to 119. how can i do this? I know how to run my run my sat. dish to change sat' but dish network box stays on 110

[beaverfever]

have you tried unplugging the box for about 1 minute?
this helps ours when this happened

[Wizard]

On my 311 and hd/dvr box, press MENU, 6,1,1 and you will be at the setup screen. you should be able to use the remote to move over to where box the has 110 and use up key to change to 119

[wa8yxm]

On the receiver it is MENU 6-1-1

On the antenna it depends on the make and model (Assumes you have an auto-pointing antenna)

Once you have changed the receiver, change the antenna and re-point, once you have a GREEN signal bar do a CHECK SWITCH. When it completes you are done.

[davydee]

Same process for the 211k receiver if you have that one. David

[Bugzme]

Thanks! Got it working