I followed the design outlined in this thread:
http://www.irv2.com/forums/f53/tailg...nt-170285.html
Here are the results:
Okay, really like the way this looked and the fact that it was up off the ground BUT...
I made mine up as almost everyone else has. I put it up and no signal. Take it down - orient the same general direction. Signal. To make sure I didn't get it wrong - I did it again. Same results. Up - no signal, down - signal.
Only difference in my construction - I couldn't locate an aluminum plate, so I made one from some plywood I had with me on the coach.
Note: when the Tailgater sits on the ground it sits on the same panel only up on the PVC.
Any ideas please?
We have a 2015 Georgetown 351 DS.
Thanks