12 V Distribution Panel

[jvanfire]

Major oops. Crossed power to coil (30 to 86) on Accessory 1 relay on distribution panel while chasing a phantom problem.

End result is that I now have no power to fuses for accessories, looks like I burned up part of the printed circuit board.

My question-- what is a reasonable estimate for what this will cost me to replace, if anyone has had similar experiences.

I intend to have the work done in a certified shop, no more playing around with voltage for me.

John VanGorder
2007 Monaco Simba Safari Class A Diesel Pusher

[RV Wizard]

jvanfire, welcome to iRV2.com. We are glad to have you join us (wish it were better circumstances) and we look forward to reading of your adventures and experiences. I am sure you will enjoy the website and forums.
Sorry to hear that a diagnosing problem has caused more issues. It sounds like you have an Intellitec EMS (energy management system) that you may have possibly damaged. Have you first checked all fuses? Did you take any ground wires loose? Are all other wires reinstalled and connections are tight? There should be a number on the board you have. With that we can look up the MSRP. Otherwise a guess would be $200-300. for the average 2 relay board.

[wa8yxm]

Could you please tell us the make and model of that power panel.. Some have circuit boards, some don't. It helps to know what panel has the problem

NOTE: Some battery control systems.. If you cross wire the solenoid, all that happens is .. The switch works backwards