digital heat and cool in a Cedar Creek

[Bushman512003]

Any one changed a C.C. out to a Dig.Stat.?I bought a Honeywell stat model# RTH111/RTH221 and would like to use it for this I have 6 wires in the C.C.red -Power/ Yellow-cool/white-Furnace/blue-high fan/brown-fan/green-ground. and 5 in the new stat.with a jumper marked RH & RC I think that means relay does it not?any wireing teck's out there?with a plan to use for this Mod. Jump in if You know how I should hook this up
I have done a few in the past but I am not sure about this one.thanks in advance for any help out there Bushman

[RV Wizard]

RC and RH are power for cooling and heating terminals. Here http://www.irv2.com/forums/f44/upgra...tat-55958.html is a discussion on doing what you want. Although it is a different model T'stat. the connections are the same.

[Bushman512003]

Thanks RV Wizard I found nothing that helped with My wireing the one that was trying to do the same gave up and bought a different stat. I may have to do the same again thanks for trying Bushman