Go Back   iRV2 Forums > RV SYSTEMS AND TECHNOLOGIES FORUMS > RV Systems & Appliances
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 08-21-2014, 08:48 AM   #1
Senior Member
edaa53's Avatar
Join Date: Jul 2013
Location: Virginia
Posts: 118
Dometic NDR1062 Frig Problem

Dometic NDR1062 (gas operation): Flames on at burner tube for a short time then solenoid shuts off gas.

Turn "On" at frig control panel
Gas light "On" at frig control panel
Gas solenoid opens
Ignition at burner tube
Thermocouple over 3 slots of flames
Flames blue approximatly 1/2: tall
Solenoid cuts off flames. Time varies from 2 minutes to 10 minutes or more
"Check" light "on" at control panel

So - any ideas. I have service manual. Thanks. Ed

2000 NM DSDP 3859
Cummins 300hp ISC 8.3L
Allison MD3060
edaa53 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-22-2014, 06:23 PM   #2
Senior Member
edaa53's Avatar
Join Date: Jul 2013
Location: Virginia
Posts: 118
OK. I removed the Burner orifice and the burner tube/igniter. Soaked all in alcohol for an several hours. Scrubbed/polished inside of burner tube w/ steel wool. Polished thermocouple tip. Checked Ohms to gas shut off, etc. Checked burner orifice w/ flashlight - looked good w/ red crystal. Installed. Flame much taller. Running now 5 hours. Thermocouple tip now bright red. Maybe problem solved?
2000 NM DSDP 3859
Cummins 300hp ISC 8.3L
Allison MD3060
edaa53 is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Kwikee Level Best 3000 Jack Problem Lt Dan MH-General Discussions & Problems 3 07-21-2014 09:13 AM
Dometic 15M Penguin ACs drop into Heat Pump Sky_Boss RV Systems & Appliances 27 06-18-2014 06:55 PM
Norcold frosting problem Navy Flier RV Systems & Appliances 3 02-22-2014 08:10 AM
Dometic Wedgewood Oven Pilot Light Problem NomadBD Travel Trailer Discussion 2 02-20-2014 07:50 PM
Redneck 1993 Allegro Bay Diesel Pusher with electrical problem jcruce13 Class A Motorhome Discussions 7 10-09-2013 11:27 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 01:40 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.