i have a 1996 Thor residency with model # 200 kick down jacks when i try to use them the light on the control panel (parking break) comes on and the jacks wont work. i have check to see if the parking break light comes on the dash and it does so i know the switch is working Ive check the control board and all wires are secure. i have down loaded the Manuel but it says to check the parking break mine is working.any suggestions.i have called hwh and they say im on the waiting list 4 to 6 weeks
__________________
1997 National dolphin 36ft tag axle
generac Q-55G GENERATOR
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
here is an update on my jack problem. talked to hwh and told the tech what was going on.(break light on control board flashing break not set but it was and dash light showed it was.) he told me that the wire splits just before it goes to the break light switch and that there is a diod on the lead if i conected the blue wire (9000) straight to a ground and it didnt work i had a bad board but if it did work the diod was bad. so i jumped the white wire from the control board to the 4 pin blue wire on the control board and it works know. it works only have to replace the diode 2.00 part im very happy
__________________
1997 National dolphin 36ft tag axle
generac Q-55G GENERATOR
Linear Mode
