Levelers will not retract

[jwitwer]

I have LCI automatic levers on my 2006 Freighliner/Airstream. On Friday, I couldn't get any of the 4 jacks to retract. The rear indicator arrow was (and is) flashing when I turn the unit on. It does not seem the motor runs when I push the retract button. So I went out and bought a right angle drill so I could use the emergency retract technique as described in the owners manual (open valves with hex wrench and use drill to drive motor/pump). Good news is that did, in fact, retract the front 2 jacks. But the bad news is that the rear ones would still not come up. Any suggestions? Is there some way I could "pry" them up? Thanks a lot.

[MisterT]

I think you may have the same problem we did one time last year in South Dakota - went to retract, the LCI panel worked, but not the levelers.
I called THOR service dpt, and they pretty much knew right away that it was probably my master 50a fuse/breaker in the battery compartment. One of the yellow 'flags' was showing - I pushed it back in, and 'voila!, the levelers worked again, no problem since.