Monitoring Batteries

[EDALLSAILS]

Is there a way to monitor EACH battery. Not each bank of battries? I'd like to be able to flip a switch and check each battery voltage? Is that possible? I have four 6 volt house batteeries tied together. and 2two 12 volt truck batteries for the chassis. Appreciate any suggestions or recomendations. Is it possible?

["007"]

Each battery bank is tied together you would have to disconnect each cable, to read a individual battery, even with a meter.

[Ed-Sommers]

Sure, no problem.

Run one lead from negative post of the battery bank to the negative contact post of a volt meter.

Now do the same with the positive post of each individual battery, but going through either a rotary switch, or momentary switch(s) between battery bank and meter.

Ed