no.co.

[steve1111111]

norcold fridge
ready 2



changed fuses still no fridge
could sur e use some advice ty in advance
steve and kelly

[paz]

Hi Steve. Welcome to iRV2.

Could you give more info like fridge model number and age. Also, when you say the fridge doesn't work, have you tried it on LP and on 120V?

The fridge needs 12V to run the circuit board, so I assume the 12V disconnect (if any) is on and that other 12V items like the pump and lights work. Battery voltage needs to be above a certain level to operate the board, so have you checked to see what the battery voltage is?

[RV Wizard]

Hello Steve and We are glad to have you join us here and we look forward to reading of your adventures and experiences. I am sure you will enjoy the website and forums. Good luck and keep us posted.
Also, be sure the coach is level as this is needed for proper refrigerator operation and allow 24 hours for fresh food area stabilization.

[Gary RVRoamer]

If you are getting the no co fault displayed on a Norcold, it has to be manually reset. It has shut down the coling system because it detected a "no cooling" situation when the LP burner was on. This could lead to a fire, so it shuts down and an interlock prevents re-stating until somebody verifies it is ok.

The procedure for a manual reset varies by fridge model. Which do you have? The procedure is in the service manual for that model.