Norcold Circuit Board Picture

[rickandcheryl]

Anyone have a picture of the circuit board in the Norcold four door 1210 refrig.? Have some wires off an want to make sure to plug/put back in the right place. Thanks, any help is appreciated. Rick

[Alan Roberts]

Hello - here is photo of my board:

On the far right (hidden by the green valve) is the large orange wire that goes to the electonic ignition for the gas burner.


Alan
02 Windsor
Beaverton,Oregon.

["007"]

Look on page 18 & 40 for control board.

[rickandcheryl]

Thanks for the help. Got all the wires put back and the refrig. work fine.

[Dr4Film]

Quote:

Originally Posted by Alan Roberts Hello - here is photo of my board: On the far right (hidden by the green valve) is the large orange wire that goes to the electronic ignition for the gas burner. Alan 02 Windsor Beaverton, Oregon.

Alan,

Based on the photo that you posted, it appears that you haven't had the latest Norcold recall installed as yet.

Are you on the waiting list? If not, you better get'er done soon !!!

Dr4Film ----- Richard

[Alan Roberts]

Richard - I have the first recall (thermal snap switch) but not the latest themocouple type. I have contacted Norcold but have not received the official letter yet. For the next few months the Windsor is winterized and the fridge is OFF. I am not sure where I will take it yet - not had much with local dealers.

Alan
02 Windsor PKD
Beaveton, Oregon

[Dr4Film]

Alan,

Glad to hear that the unit is not being used and turned off. I am a full-timer so mine is on 24/7. Had mine done at the local Camping World as other local RV service areas were having problems getting the kit from Norcold but CW got them in less than a week.

You don't need to get the official letter from Norcold. Just take it to a service center you can trust but have them order the kit first. You will need the CU and Frig serial numbers along with the coach VIN.

I keep track of all recalls relative to my rig and components regularly.

Dr4Film ----- Richard.