Problems With Slide Closing. Looking For Help.

[meparrothead]

Good Day All,

I have a 2006 Tiffin Allegro Bus, 42 QDP, experiencing the following problem with the right rear bedroom slide out. The slide was backing out when in the enclosed position. The hydronic solenoid was replaced. It now appears that the slide stays in, but the forward vertical edge/seam does not sit flush like the other three seams do. The non-flush edge sits approximately .5 inches from the wall that it should.

Questions for more experienced owners:
What might cause this?
Is the slide rail bent?
Will it do any damage to the slide itself?
Will it do any damage to the wall the slide sits in?
Suggestions on repairs or questions to ask a repair shop or technician?

I appreciate any assistance that anyone might offer.

Hope you are all having a great day and wonderful weekend. Have safe travels out there.

[CLIFFTALL]

Welcome to irv2. I've moved your thread here to get a broader view and hopefully sone assistance.
Cliff

[dvmweb]

Motors out of sync?


2013 FleetWood Expedition 38B

[Melmoses]

Sounds like the slide needs adjustment as suggested. I had one of my motors in that same slide replaced and had the same issue.

[terry735001]

i had the same thing .. when testing and pulled out the valve .. i got air in the system and the air did take some time to work its way up to the slide . and the same thing happen and had to get the air out of the system