Radio 12 volt power switch

[leeines]

2007 Monaco Knight 40 PBQ.
Radio power switch quit.
Center dash panel contains the radio, a stairwell cover switch, a generator switch, and the radio power switch.
NO 12 volts to the switch.
I think the switch is ok only because I can get continuity across some terminals with the switch in the on position.
No voltage to the switch.
I have checked every fuse in the front run panel under the driver's window outside.
Anyone know where the fuse is and if so, is there a relay associated with this switch?
Thanks,
Lee

["007"]

Have you got behind the dash panel and checked the wiring in back of switch for wire connection with spade clip on switch, have been known to fall off.

[leeines]

Thank you for your suggestion.
Lee