Refrigerator Reset Issue

[Greg121]

Lately whenever I've shut down the Norcold 1200 to move, when I turn it back on the temp goes to full cold. That may be normal, can't remember, but when I go to change the temp setting the no good Norcold shuts down.

After much aggravation and several tries I can usually get it to a good setting.

Its due for replacement by a residential but just not right now. My initial thought is the control board is going and replace that. But I hate to throw close to $200 at it not long before it gets replaced if thats not the problem.

Keypad is the only other thing that comes to mind tho. Has this happend to anyone else? Or any other thoughts on the issue?

Thanks... Greg

[Dr4Film]

Greg,

It very well could be your control board and or the eyebrow board.

I just may have one of each in my storage cabinet in my rolling garage. I would need to go look today. If so, they could be had as I now use a residential fridge.

Dr4Film ----- Richard