Securing Led boards

[ctcamper]

What have you used to secure the flat ... rectangular or square led boards to the lamp fixture? I have a t10 socket that I used direct led plug in replacements and they did not put out enough light as they had only 4 led's on the bulb, so I bought a 60 mm x 40 mm led panel with a set of different connectors and 48 smd leds on it. I have thermal epoxy but it's expensive and since I'm not covering the led's themselves ( I just want to glue the back of the board to the lamp reflector ) I think maybe something else would be better. Silicone? or is there something better? I am thinking that silicone might be easy to take off and not damage anything.

[hoppers4]

I used double back tape. The box calls it Scotch Permanent Mounting tape, Catalog # 4026. The double back tape that came with my led squares quickly melted and they fell off so I had to come up with something else that could handle the heat. The double back tape has worked fine for several months now.

[Midniteoyl]

Dab of silicone ..

[tvman44]

Double stick tape.