Turn me on??

[SargeW]

My HWH jack system works well (after I finally got all the drips fixed) and am quite happy with it. The only irritation that I have with it is that is does not work unless the ignition key is in the "run" position. The HWH manual says that it should come on and retract or deploy the jacks with the key in the accessory position, but it never has. I either have to deploy the jacks with the engine running while in neutral with the air brake on, or with the engine off, key in the start position.

Kinda bugs me because it's not working as designed. Anyone else have this issue??

Sarge

[SargeW]

My HWH jack system works well (after I finally got all the drips fixed) and am quite happy with it. The only irritation that I have with it is that is does not work unless the ignition key is in the "run" position. The HWH manual says that it should come on and retract or deploy the jacks with the key in the accessory position, but it never has. I either have to deploy the jacks with the engine running while in neutral with the air brake on, or with the engine off, key in the start position.

Kinda bugs me because it's not working as designed. Anyone else have this issue??

Sarge

[tom wilson]

mine works in the accessory position and would get the dealer dervice dept to fix it.
i have been to hwh 4 times for help on my jacks so you might contact them. hwhcorp.com.

[Ken Roberts]

Sarge, I agree with you that it is always nice to have things work as they were intende. However, I do not think you have an HWH problem, I think it is an ignition problem that should be addressed by chassis manufacturer, Ken,'04'DSDP...