Weather Pro Awning problems
A complete control kit to replace the box and sensor are available at rv parts 4 less. I found this site today while looking for a solution to my problem. Here is a quick check: the circuit board in the control box contains an audible alarm to alert the user when there is a problem with the wind sensor or wind sensor cable. To test this alarm, disconnect the FLAT four (4) conductor wind sensor cable from the side of the control box. Place the wind sensor in the ENABLE (ON) position. The alarm shuld beep from inside the control box. If this occurs under normal operation, this would indicate a problem with the wind sensor wire or the connection between the wire and the circuit board, or the wire and wind sensor. I got this info from a site that I found by Googling "weather pro awning problems." Hope this helps.