Weldex Camera Monitor

[Washtubman]

Black and white camera monitor goes in and out. Mostly out lately! Connections are good and I have 12V to the monitor. If I turn the key off and back on, it will work for about 20 seconds, then slowly fade to a white screen and then to gray; same if I unplug and plug back in the power connection on the back. If I just turn it off and back on with the power button, it won't come back on at all even though the green power LED is on. Questions: How do I determine it's not the camera? I do think it's the monitor, but it is no longer made and wondering if anyone may know of a source or what else I might use? I tried google, ebay, etc with no luck. It's in a 2006 Holiday Rambler. I removed the camera, and the connections are molded into it.

[2 Stroker]

I thought I was having a problem with my Weldex so I call
RV Cams: Backup Camera Systems (All)
RV Cams
Brent Jones
Technical Support//Sales
1-877-378-2267
and sent them my monitor. They charged me 20$ but they said it was fine worked great plus I talked to Brent for about 30min on the phone.
So I did some more looking come to find the problem was with my Silverleaf that runs through the monitor that the J1708 protocol plug was part way pulled out, problem solved.

2 stroker

[Washtubman]

Stoker, what is the Silverleaf?

[2 Stroker]

Originally Posted by Washtubman

Stoker, what is the Silverleaf?

Here is the one you can use with a PC that a lot of guys have and place on the dash or get holders for a 10" PC
VMSpc | SilverLeaf Electronics, Inc.
I have the one that goes through the backup monitor
New Product Announcement! | SilverLeaf Electronics, Inc.
When on the road you need something to see what is going on with your investment, even the Scangauge D works well.
ScanGaugeD - Advanced J1939 & J1708 compatible Vehicle Monitor for Diesel Pusher Vehicles : Linear Logic
I like to see a lot of info at one time, would not leave home without it.
2 stroker